Security Token Service not running

I wanted to start the profile synchronization job on my Sharepoint 2010 instance. One of the problems it did not work was, that the Security Token Service was not running.
I checked the health analyzer reports and there was the Security Token Service marked as not available. Then I went to IIS and there picked the SharePoint Web Services Site and in the tree below clicked SecurityTokenServiceApplication and checked the basic settings. when clicking "Test settings" I received an error, that the application path was not correct. Clicked the "Connect as" button and inserted a user, where I knew it has extended rights and voila the tested connection worked.

This was still not solving the issue with the profile synchronization, but at least one step closer.

JQuery Ajax does not work after .NET Ajax request

I had the problem, that I was using an jquery ajax request on a website. I was using the document ready to initialize the function. When a .NET ajax request happend afterwards, the functionality of my jquery was not enabled anymore.

Solution of that was, to initialize the function to the Sys.WebForms.

It worked like that:

jQuery(document).ready(function () {

Myfunction();
load();
});

function load() {
Sys.WebForms.PageRequestManager.getInstance().add_endRequest(Myfunction);
}

Using temporary HttpContext in Sharepoint

Quite often you run into the problem, that classes do use the current HttpContext with all the permissions set. I had this problem e.g. with the PortalSiteMapProvider. It uses the regular HttpContext and there is no chance to set other properties to it. In this case you can use a temporary HttpContext to give it the SPWeb you need with the permissions of a specified user. After running your code you can turn back to the regular context.

public class TemporaryHttpContext : IDisposable
{
public TemporaryHttpContext()
{
thecurrentContext = HttpContext.Current;
HttpContext.Current = null;
}

public TemporaryHttpContext(SPWeb spweb, string userlogin) : this()
{
TemporyContext(spweb, userlogin);
}

private HttpContext thecurrentContext { get; set; }

public void TemporaryContext(SPWeb spweb, string userlogin)
{
if (spweb == null || !spweb.Exists)
{
throw new ArgumentNullException("web");
}

var request = new HttpRequest("", spweb.Url, "");
HttpContext.Current = new HttpContext(request, new HttpResponse(new StringWriter(CultureInfo.CurrentCulture)));

HttpContext.Current.Items["HttpHandlerSPWeb"] = spweb;

var wi = WindowsIdentity.GetCurrent();
if (wi != null)
{
FieldInfo fieldInfo = typeof(WindowsIdentity).GetField("m_name", BindingFlags.NonPublic | BindingFlags.Instance);
if (fieldInfo != null)
{
fieldInfo.SetValue(wi, userlogin);
}

HttpContext.Current.User = new GenericPrincipal(wi, new string[0]);
}
}

public void OldContext()
{
HttpContext.Current = thecurrentContext;
}

public void Dispose()
{
OldContext();
}
}


Afterwards just wrap your code into the temporary context like this:


TemporaryHttpContext tempcontext = new TemporaryHttpContext();
tempcontext.TemporaryContext(spweb, userloginname);
[Your code that needs a temporary context]
tempcontext.Dispose();

and then everything should work smoothly.

Webpart maintenance page

If you are running into the problem, that you added a webpart to your page and you want to remove it, because it breaks your page, then just add the query-string ?contents=1 to your URL and it will redirect you to the webpart maintenance page.

Webpart maintenance page

If you are running into the problem, that you added a webpart to your page and you want to remove it, because it breaks your page, then just add the query-string ?contents=1 to your URL and it will redirect you to the webpart maintenance page.

Cannot generate serialization assembly ... Use /force to force an overwrite

I received this error when trying to deploy something to Sharepoint. The issue seems to be, that the dll is locked by some procedure of the IIS. Just perform in the command line a "iisreset" and try again.
Sometimes you also have to close Visual Studio and re-open after the iisreset and try again.

How to get the default page of a site

It is not always necessary to have the default page of a site called default.aspx.
You can use a page called mypage.aspx and use this one as default.

But when you iterate through a site, how do you find out, which page is the default one. Therefore use a code like this to find out.

First you need a SPWeb object of your site-url (e.g. your site-url is http://www.yourwebapp.com/yoursite/yoursubsite/)

string result = string.Empty;
SPSecurity.RunWithElevatedPrivileges(delegate{
SPWeb web = SPContext.Current.Site.OpenWeb("yoursite/yoursubsite");
result = web.RootFolder.WelcomePage;
});

The result value will be "Pages/mypage.aspx".

Variations Display Name vs. Label

Always good to know.
Display Name is the name shown in the structure tree and the name of the site.
The label is the name of the variation.

How to: c# code in powershell script

I was looking for a way to add C# code to a powershell script, because sometimes you are not able to run everything with powershell.
It works like this:

first reference to the assemblies your code uses:
$referencingassemblies = (
"Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" ,
"Microsoft.SharePoint.Publishing, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c",
"System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089",
"System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
)

Then insert the source and store it in a variable. Be aware to have all the assemblies you are using referenced in your variable above:
$mysource = @"
using Microsoft.SharePoint.Publishing.Administration;
using Microsoft.SharePoint;
using System;
using System.Data;
using System.Xml;
using Microsoft.SharePoint.Publishing;

namespace MyNamespace
{
public static class MyClass
{
public static void Do(SPWeb rootWeb)
{
Console.WriteLine(rootWeb.Url);
Console.WriteLine(rootWeb.Title);
}
}
}
"@

Then add the code to the memory and call your code:
#Here you just add the assemblies and the code to the memory
Add-Type -ReferencedAssemblies $referencingassemblies -TypeDefinition $mysource -Language CSharp
#For this sample I will need another assembly
[system.reflection.assembly]::LoadWithPartialName("Microsoft.Sharepoint")
#Load the site-object of your webapp
$site = New-Object Microsoft.SharePoint.SPSite("http://www.mydomain.com")
#Use the rootweb of your site
$root = $site.rootweb
#Overload to your C# method. To call the method use in brakets the namespace and class.
[MyNamespace.MyClass]::Do($root)

In this sample above you already see how to combine powershell code with C# code. If you change something in your C# code, then close the powershell window and re-open, so the code will be loaded/added to memory again. Otherwise you won't see the changes you made.
You can copy the code-segments above into one powershell script file and give it a try.

Always needed information

I often can't recall, which Request.Url property returns what string. So I have published here now the most usefull ones:
Request.Url.AbsolutePath: /test/test34/testpage.aspx
Request.Url.Host: localhost
Request.Url.Query: ?test1=true&test2=false&test4=string
Segments: /
Segments: test/
Segments: test34/
Segments: testpage.aspx
Request.Url.AbsoluteUri: http://localhost:1234/test/test34/testpage.aspx?test1=true&test2=false&test4=string
Request.RawUrl: /test/test34/testpage.aspx?test1=true&test2=false&test4=string
Request.Url.ToString(): http://localhost:1234/test/test34/testpage.aspx?test1=true&test2=false&test4=string

Powershell - site-defintion installation

I had the following problem. I created a powershell script to install a solution, that contains a site-defintion to a web-application. The issue I ran into was, that the template I am using to create the SPSite in this web-application was not recognized. That means everytime I tried to use this custom template, I received the error ""

On the web I found the cause for this error. The template is not recognized in this session. When you open parallel another powershell window and list the templates (get-spwebtemplates), then you see your template. But not in the host window.

To avoid this error, you have to start another powershell process out of the host window. There you can work with the template.
Be aware to add a sleep function, because the install of the solution with the site-definition needs to be terminated before being able to work with it.

You can copy the host-script into a file called hostscript.ps1 and the new window script into a file called window.ps1

---- your host script ------- (rename the %% variables with your parameters)
#This function installs the solution
function InstallSolution([string] $solutionname, [string] $url)
{
#Check if solution already exists
$solution = Get-SPSolution | where-object {$_.Name -eq $solutionname}
if ($solution -eq $null)
{
#If it is not added yet. Add it and then deploy it.
Add-SPSolution -LiteralPath "%your solution directory%\$solutionname"
Install-SPSolution –Identity $SolutionName –WebApplication "http://$url" –GACDeployment
}
$solution = Get-SPSolution | where-object {$_.Name -eq $solutionname}
#Run the sleeper. It will wait until the solution is finally deployed
do
{
Start-Sleep -Seconds 10
}
until ($solution.Deployed -eq $true)
}

#Enter your parameters here
$webapplicationname = %webapplication-name%
$webapplicationport = %webapplication-port%
$hostheader = %host-header%
$url = %url%
$iisdirectory = %iis-directory%
$apppool = %app-pool%
$apppoolaccount = %app-pool-account%
$databasename = %database-name%
$databaseserver = %database-server%
$sitecollectionadmin = %site-collection-admin%

#Create a new web-application with the above mentioned parameters
New-SPWebApplication -Name $webapplicationname -Port $webapplicationport -AllowAnonymousAccess:$true -HostHeader $hostheader -URL "http://$url" -Path $iisdirectory -ApplicationPool $apppool -ApplicationPoolAccount (Get-SPManagedAccount $apppoolaccount) -DatabaseName $databasename -DatabaseServer $databaseserver

#Call the function above and overload the needed parameters
InstallSolution "%my solution name%", $url

#Here is your template-name. If you don't know yours, then just install the solution and run get-spwebtemplate. It lists all templates. Yours is then supposed to be there as well with the correct # value.
$mydefinitiontemplate = "%My Template%#0"

#Here the new console powershell-window opens.
$newwindow = New-Object system.Diagnostics.ProcessStartInfo
$newwindow.FileName = "powershell.exe"
#I am overloading some variables just to show, how this works
$newwindow.Arguments = "-noexit %your install directory%\window.ps1 $url $mydefinitiontemplate $sitecollectionadmin"
$process = [system.Diagnostics.Process]::Start($newwindow)
#The process will wait, until the window will exit and close
$process.waitforexit()

#Finally just reset the iis
iisreset
---- end host script -------


---- your new window script ------- (rename the %% variables with your parameters)
#Here you catch the overloaded parameters and fill some variables with it
$url = $args[0]
$mytemplatename = $args[1]
$sitecollectionadmin = $args[2]

#Create the new site-collection
New-SPSite -URL "http://$url" -OwnerAlias $sitecollectionadmin -Name %your site name% -Template $mytemplatename
#Tell the host-window, that this window closed
$Host.SetShouldExit(0)
---- end new window script -------

Then save those files somewhere and open powershell and type:
[your path of the hostscript.ps1 file]\hostscript.ps1

This script now creates the web-application, installs the solution with the site-definition and as soon as the solution is deployed, it opens a new console window, to run the second script, that creates a new site-collection in the web-application with the site-definition template you deployed. The window closes afterwards and the host-window then does an iisreset.

It took me quite long to find out about this speciality with site-definition solution deployment and using the template afterwards when creating a site-collection.

... Failed to create receiver object from assembly ... value cannot be null

I had this error, when I deployed a custom site-definition and then tried to create a new site-collection. The error was caused by a code I deployed some time before. I retracted those solutions and then deployed from scratch. It is important to clean out with old "not used" solutions. Also check in the Central-Administration, if all not used solutions are removed. After the new deployment, everything went smooth.

It could also be, that there is somewhere an assembly, that is called the same or does have similar namespaces.

failed to instantiate file default.master not found.

This was a tough one. Trying to setup a site-definition and then received this error always, when trying to create a site.
My basic site-definition was extended with a module to initialize the masterpage, because I read on a website to do so.
It seems that the error is somewhere completely different. Got to the onet.xml and change the configuration-tag:

Usually most websites do show the onet.xml configuration tag as a relative path. But this change fixed my project.

the specified path, file name, or both are too long - Sharepoint 2010

Cut down your names. It might be, that your solution, files, etc. are too long. Just cut them down. Check the "project folder" property of your project. Is it not supposed to be very long. Try to keep it short.

the referenced file is not allowed on this page - Sharepoint 2010

It seems you are trying to register a user-control from the layouts folder. Put it into the controltemplates folder and it should work.

Error Sharepoint 2010 "Could not load type" when loading a custom Page

Ich habe eine bestehende Sharepoint Seite durch eine eigene ersetzt und wollte dann in der Page Deklaration auf meine Klasse verweisen. Nach dem Deployment bekam ich oben genannten Fehler. Dieser tritt nicht auf, wenn man in der Page Deklaration im Inherit Attribut nicht nur auf die Klasse verweist, sondern auf die Assembly, den Token und Version.
Alt:
<%@ Page Language="C#" Inherits="[mein Namespace].[meine Klasse]" MasterPageFile="~/_layouts/dialog.master" %>
Neu:
<%@ Page Language="C#" Inherits="[mein Namespace].[meine Klasse], [Assemblyname], Version=1.0.0.0, Culture=neutral, PublicKeyToken=[Token ID]" MasterPageFile="~/_layouts/dialog.master" %>

I had replaced an existing Sharepoint page with a custom one and referenced in the page declaration to my class. After deployment I got the error mentioned above. This error won't raise, when you extend the inherit attribute with the assembly, token and version.
Old:
<%@ Page Language="C#" Inherits="[my namespace].[my class]" MasterPageFile="~/_layouts/dialog.master" %>
New:
<%@ Page Language="C#" Inherits="[my namespace].[my class], [assembly-name], Version=1.0.0.0, Culture=neutral, PublicKeyToken=[Token ID]" MasterPageFile="~/_layouts/dialog.master" %>

Error occured in deployment step cannot connect [Url]

Ein Fehler, warum er nicht auf eine bestimmte Url deployen kann aus dem Visual Studio 2010, kann sein, dass man entweder im Host-file und/oder dem (Zentraladministration) System Settings -> Configure alternate access mappings falsche Urls als Verweis eingetragen hat.
Wenn man lokal entwickelt, müssen die Url im Visual Studio der Url im Access-mapping und der Url im Host-file entsprechen.

The error, why you can't deploy out of Visual Studio 2010 to a specified url, can be caused, because you might not have the correct urls set in the host-file and/or (Central administration) System Settings -> Configure alternate access mappings.
When developing locally, the urls need to be the same in Visual Studio, access-mapping and the host-file.